In
response to the tremendous positive feedback
of the Cigar Oasis our customers began to
demand a higher capacity unit for larger humidors
such as display cases, cigar armoires and
cigar end tables etc up to 60 cubic feet in
size. We responded with the Cigar Oasis II
XL.
The
newest version of the Cigar Oasis II XL now
implements microprocessor electronics to maintain
and monitor humidity accurately and post it
to an easy-to-read digital display. This display
gives its user the ability to view humidity
levels in real time and adjust the humidity
control as needed. This display module is
attached to a 6 foot extension that allows
the user to mount it in a convenient location.
Built-in flashing alerts tell you if humidity
drops below a certain point for over two hours
which indicates its resovior is low on water
or there is a major leak in the humidor.
- Designed
for large humidors, armoires and cigar display
cases measuring from 10-60 cubic feet.
- Complete
unattended smooth operation
- Uses
100% distilled water without chemicals
- Remote
display with humidity setting controls
- Display
flashes when low on water
Built-in
water reservoir is refillable
- Built-in
mold retardant and filtration
- Set
to maintain humidity at 70%
- Adjustable
humidity level from 60-80%
- Maintains
1,000-5,000+ cigars
- Circulation
fan maintains uniform humidity levels
- Measures
6 1/2" wide x 6" high x 13"
long
-
Standard adapter included: 120VAC (Optional
240VAC available. Please inquire)
Operation: The Cigar Oasis II XL features
a unique sensor that accurately measures the
humidity inside the humidor enclosure. When
humidity drops below the preset value, the
sensor sends a signal to trigger operation
of a control fan that draws the air into the
inlet vents of Oasis unit and directs the
air into its water resvoir for "charging".
The "moisturized" air is then emitted
back into the humidor.
The
Cigar Oasis II XL features second fan which
runs full time to assure that air is always
circulating throughout the controlled space.
The greater air circulation ability of the
Cigar Oasis II XL provides for ultra-fast
humidity regulation within your humidor. Once
the desired humidity level is reached, the
sensor monitors and insures that the humidity
stays fixed at that set level. If you open
your humidor and the humidity drops below
the set point, the Oasis sensor will power
on the moisiure fan to bring humidity levels
back to the specified preset.
If you are using the Cigar Oasis II XL system
in a very large cigar enclosure a socket is
available (please inquire) for an auxiliary
fan which includes extended wires so you can
situate the components in a suitable location
to avoid circulation gradients.
The
Cigar Oasis II XL includes a foam core block
inside its water resevoir which is treated
with an antifungal agent. The user must fill
the water reservoir containing the foam with
distilled water only. The foam is a large
block that will last for 2-3 years and replacement
blocks are available upon request.
|
